Quantum chemical computational studies on 5-(4-bromophenylamino)-2-methylsulfanylmethyl-2H-1,2,3-triazol-4-carboxylic acid ethyl ester

The optimized molecular geometry, vibrational frequencies, and gauge including atomic orbital (GIAO) (1)H and (13)C NMR shift values of 5-(4-bromophenylamino)-2-methylsulfanylmethyl-2H-1,2,3-triazol-4-carboxylic acid ethyl ester have been calculated by using Hartree-Fock (HF) and density functional method (DFT/B3LYP) with 6-31G(d), 6-31G(d,p) and LANL2DZ basis sets. The optimized molecular geometric parameters were presented and compared with the data obtained from X-ray diffraction. In order to fit the calculated harmonic wavenumbers to the experimentally observed ones, scaled quantum mechanics force field (SQM FF) methodology was proceeded. Correlation factors between the experimental and calculated (1)H chemical shift values of the title compound in vacuum and in CHCl(3) solution by using the conductor-like screening continuum solvation model (COSMO) were reported. The calculated results showed that the optimized geometry well reproduces the crystal structure. The theoretical vibrational frequencies and chemical shifts are in very good agreement with the experimental data. In solvent media the energetic behavior of the title compound was also examined by using the B3LYP method with the 6-31G(d) basis set, applying the COSMO model. The obtained results indicated that the total energy of the title compound decreases with increasing polarity of the solvent. Furthermore, molecular electrostatic potential (MEP), natural bond orbital (NBO) and frontier molecular orbitals (FMOs) of the title compound were performed by the B3LYP/LANL2DZ method, and also thermodynamic parameters for the title compound were calculated at all the HF and B3LYP levels.     

Preparation and characterization of nano-sized Pt-Ru/C catalysts and their superior catalytic activities for methanol and ethanol oxidation

Carbon-supported PtRu nanoparticles (Ru/Pt: 0.25) were prepared by three different methods; simultaneous reduction of PtCl(4) and RuCl(3) (catalyst I) and changing the reduction order of PtCl(4) and RuCl(3) (catalysts II and III) to enhance the performance of the anodic catalysts for methanol and ethanol oxidation. Structure, microstructure and surface characterizations of all the catalysts were carried out by X-ray diffraction (XRD), transmission electron microscopy (TEM) coupled with energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). The results of the XRD analysis showed that all catalysts had a face-centered cubic (fcc) structure with different and smaller lattice parameters than that of pure platinum, showing that the Ru incorporates into the Pt fcc structure by different ratios in all the catalysts. The typical particle sizes of all catalysts were in the range of 2-3 nm. The most active and stable catalyst for methanol and ethanol oxidation is catalyst III, in which a large amount (more than 90%) of PtRu alloy formation was observed. It has been found that this catalyst is about 8.0 and 33.4 times more active at ～0.60 V towards the methanol and ethanol oxidation reactions, respectively, compared to the commercial Pt catalyst.     

Metal complexes of a homopolymer system containing diethanolamine side group: synthesis and dielectrical behaviors

In this work, 4-diethanolaminomethyl styrene (DEAMSt) monomer was prepared by modification of 4-chloromethyl styrene with diethanolamine. The homopolymerization of styrene modificated was carried out by free radical polymerization method at 60?°C in presence of 1,4-dioxane and AIBN. The metal complexes were prepared by reaction of the homopolymer used as ligand P(DEAMSt)L^l and Ni(II), Co(II) metal ions in presence of ethanol and dilute NaOH at 65?°C for 48?h in pH 6.

The structure of modificated monomer, homopolymer used as ligand and polymer-metal complexes were characterized by (FT-IR), ¹H-NMR, ¹³C-NMR, Raman spectroscopy tecniques, elemental analysis, SEM, XRD and magnetic measurements. Their geometric structures according to magnetic measurements of Co(II) and Ni(II) complexes were estimated that have a tetrahedral structure. P(DEAMSt)L^l polymer has a transition state between amorphous and crystalline, whereas metal complexes (Co(II) and Ni(II) are with a large crystal structure. The molecular weight of P(DEAMSt)L¹ homopolymer was determined by gel permeation chromatography (GPC). The glass transition temperature (Tg) of homopolymer was measured by differantial scanning calorimeter (DSC). The thermal behaviors of both ligand and polymer-metal complexes were investigated by thermogravimetric analysis (TGA) and (DTA). The results obtained were compared with each other. Then, the dielectrical measurements (dielectric constant, dielectric loss and conductivity) of the ligand and polymer-metal complexes were investigated as a function of temperature and frequency. The activation energies (Ea) of the ligand and metal complexes were determined from the conductivity measurements.     

Synthesis, characterization and biological evaluation of a novel Cu(II) complex with the mixed ligands 2,6-pyridinedicarboxylic acid and 2-aminopyridine

A novel bridged binuclear Cu(II) complex with mixed ligands, di-μ-(2-aminopyridine(N,N′))-bis[(2,6-pyridinedicarboxylate)aquacopper(II)] tetrahydrate, formulated as [Cu(μ-ap)(dipic)(H₂O)]₂·4H₂O (1) (dipic = 2,6-pyridinedicarboxylate, ap = 2-aminopyridine), has been synthesized and characterized by elemental, spectral (IR and UV–Vis.), thermal analysis, magnetic measurements and single crystal X-ray diffraction analysis. The central Cu(II) ion resides on a centre of symmetry in a distorted square-pyramid coordination environment comprising of two N atoms, one from dipic and one from the ap ring, two carboxylate O atoms from dipic, and one O atom from water. Intermolecular N–HO and O–HO hydrogen bonds and π–π stacking interactions seem to be effective in the stabilization of the crystal structure. The free ligands and the complex were also evaluated for their antimicrobial and radical scavenging activities (DPPH = 1,1-diphenyl-2-picrylhydrazyl hydrate) using in vitro microdilution methods. Antimicrobial screening of the free ligands and their complex showed that the free ligands and the complex possess antifungal activity against Candida sp.     

Large-scale plasmonic microarrays for label-free high-throughput screening

Microarrays allowing simultaneous analysis of thousands of parameters can significantly accelerate screening of large libraries of pharmaceutical compounds and biomolecular interactions. For large-scale studies on diverse biomedical samples, reliable, label-free, and high-content microarrays are needed. In this work, using large-area plasmonic nanohole arrays, we demonstrate for the first time a large-scale label-free microarray technology with over one million sensors on a single microscope slide. A dual-color filter imaging method is introduced to dramatically increase the accuracy, reliability, and signal-to-noise ratio of the sensors in a highly multiplexed manner. We used our technology to quantitatively measure protein-protein interactions. Our platform, which is highly compatible with the current microarray scanning systems can enable a powerful screening technology and facilitate diagnosis and treatment of diseases.     

Fourier optics analysis of grating sensors with tilt errors

Dynamic diffraction gratings can be microfabricated with precision and offer extremely sensitive displacement measurements and light intensity modulation. The effect of pure translation of the moving part of the grating on diffracted order intensities is well known. This study focuses on the parameters that limit the intensity and the contrast of the interference. The effects of grating duty cycle, mirror reflectivities, sensor tilt and detector size are investigated using Fourier optics theory and Gaussian beam optics. Analytical findings reveal that fringe visibility becomes <0.3 when the optical path variation exceeds half the wavelength within the grating interferometer. The fringe visibility can be compensated by monitoring the interfering portion of the diffracted order light only through detector size reduction in the expense of optical power. Experiments were conducted with a grating interferometer that resulted in an eightfold increase in fringe visibility with reduced detector size, which is in agreement with theory. Findings show that diffraction grating readout principle is not limited to translating sensors but also can be used for sensors with tilt or other deflection modes.     

Positive evolution families solving nonautonomous difference equations

We study nonautonomous linear difference equations via the corresponding abstract Cauchy problem. The domains of the associated operators are time dependent and do not contain a common core, so we have to prove wellposedness by a direct approach. In the periodic case we then investigate the asymptotics (in different topologies) of the corresponding evolution families using the Perron?CFrobenius theory for positive matrices combined with spectral decomposition methods. Finally, we show how flows in time-dependent networks can be treated within this framework.     

Fully automated cellular-resolution vertebrate screening platform with parallel animal processing

The zebrafish larva is an optically-transparent vertebrate model with complex organs that is widely used to study genetics, developmental biology, and to model various human diseases. In this article, we present a set of novel technologies that significantly increase the throughput and capabilities of our previously described vertebrate automated screening technology (VAST). We developed a robust multi-thread system that can simultaneously process multiple animals. System throughput is limited only by the image acquisition speed rather than by the fluidic or mechanical processes. We developed image recognition algorithms that fully automate manipulation of animals, including orienting and positioning regions of interest within the microscope's field of view. We also identified the optimal capillary materials for high-resolution, distortion-free, low-background imaging of zebrafish larvae.     

A discrete artificial bee colony algorithm for the multi-objective flexible job-shop scheduling problem with maintenance activities

This paper presents a novel discrete artificial bee colony (DABC) algorithm for solving the multi-objective flexible job shop scheduling problem with maintenance activities. Performance criteria considered are the maximum completion time so called makespan, the total workload of machines and the workload of the critical machine. Unlike the original ABC algorithm, the proposed DABC algorithm presents a unique solution representation where a food source is represented by two discrete vectors and tabu search (TS) is applied to each food source to generate neighboring food sources for the employed bees, onlooker bees, and scout bees. An efficient initialization scheme is introduced to construct the initial population with a certain level of quality and diversity. A self-adaptive strategy is adopted to enable the DABC algorithm with learning ability for producing neighboring solutions in different promising regions whereas an external Pareto archive set is designed to record the non-dominated solutions found so far. Furthermore, a novel decoding method is also presented to tackle maintenance activities in schedules generated. The proposed DABC algorithm is tested on a set of the well-known benchmark instances from the existing literature. Through a detailed analysis of experimental results, the highly effective and efficient performance of the proposed DABC algorithm is shown against the best performing algorithms from the literature.     

Effect of a buffer layer between the shell and ligand on the optical properties of an exciton and biexciton in type-II quantum dot nanocrystals

In this study, we have investigated the effect of the buffer layers on the electronic and optical properties of an exciton (X) and a biexciton (XX) in a type-II CdTe/CdSe quantum dot nanocrystal. In an experimental study, it has been reported that when a CdTe/CdSe quantum dot nanocrystal is coated by a ZnTe material as a buffer layer, the photoluminescence quantum yield is growing from 4 to 20%. We have confirmed theoretically this improvement and extended the calculations to an XX structure. In the calculations, two different semiconductor materials, CdS and ZnTe, have been considered for the buffer layer. We have theoretically shown that the buffer layer causes an increase in the radiative oscillator strength of both X and XX. When the ZnTe is used as the buffer layer, the oscillator strength becomes stronger when compared to CdSe buffer material because of higher conduction band offset between CdSe and ZnTe.